WRTnode Web Portal
The code is provided at https://github.com/qizha/xhi,At this point we start to define the interaction way of WRTnode’s web.Traditional OpenWrt luci as advanced Settings.
Download and install ipk
Download the http://d.wrtnode.com/packages/webwifi_1_ramips_24kec.ipk and Upload your WRTnode. Then ,log in to your WRTnode and perform:
$ opkg install webwifi_1_ramips_24kec.ipk
Ipk packages installed will execute the following script later:
(If you want to nitpick script name is too long, Teach you a trick, Under Linux the Tab key to magical function of completion, So you only need to input a few characters, and then use the Tab key to completion)
Open your browser(If ever visit luci interface before, please clear the browser cache),input: 192.168.8.1,clicke the Enter batten , the following interface will appear, congratulations! Your WRTnode web portal set up successfully.
Select your wireless access point and fill in the wireless password， Click to save. Because of the process to restart the network, some minutes is wanted, you will be prompted has been connected to the IP address of the router and distribution after refresh the page. Click set password management, you can change your wifi password.
Click WRTnode Control Panel back to openwrt luci interface.
If you want to remove webwifi software package, perform:
$ opkg remove webwifi
After unloading webwifi packages to execute the following script, Also use the Tab key to match.Remember! after unloading webwifi this script must be executed:
How will these packages compiled together with the firmware
OpenWRT of feeds for updates and installation (refer to the specific process http://wiki.wrtnode.com/index.php?title=Compiling_WRTnode_Firmware ):
$ cd trunk $ cp feeds.conf.default feeds.conf $ echo "src-git wrtnode https://github.com/WRTnode/openwrt-packages.git" >> ./feeds.conf $ ./scripts/feeds update -a $ ./scripts/feeds install -a
$ make menuconfig